Ingot Mold

Aluminum Ingot Mold is a critical cast iron tooling used in the aluminum smelting industry for casting molten aluminum into standard-shaped ingots. It is primarily made of materials such as gray cast iron (HT200, HT250), ductile iron (QT400-15, QT500-7), and in some cases, cast steel or compacted graphite iron. The mold shapes the molten aluminum through its internal cavity and facilitates rapid solidification by leveraging its high thermal conductivity. Prior to each casting operation, a graphite-based or similar release coating must be applied to prevent sticking. The mold operates on an automated casting line, cycling through the processes of pouring, cooling, and tilting for ejection. Designed to endure extreme thermal cycling, it is prone to thermal fatigue cracking, and its performance directly impacts both ingot quality and production efficiency.

Aluminum Ingot Mold Technical Parameters & Specifications

Parameter Category Specific Parameter Description & Standard Value Notes
​Ingot Specification​ Standard Weight 6 kg,8 kg,10 kg,20 kg, 22.5 kg, 25 kg The most common standard weights. Custom weights available.
Ingot Shape Truncated Pyramid (Trapezoidal) Standard design for stable stacking and efficient demolding.
Top Surface (L x W) e.g., 172 mm x 73 mm Dimensions are weight-dependent. Example given for a 20kg ingot.
Bottom Surface (L x W) e.g., 184 mm x 85 mm Larger than top surface to provide draft angle for demolding.
Height / Depth e.g., 85 mm Determines the ingot’s thickness.
​Mold Cavity Design​ Number of Cavities Single Cavity, 2-in-line, 4-in-line, etc. Designed to match casting machine configuration and output requirements.
Draft Angle 1.5° – 3.0° per side ​Critical​ parameter to ensure smooth, non-destructive ingot release.
Bottom Hole (Vent Hole) Ø 3 – 5 mm Allows for drainage of cleaning water and initial air venting during pouring.
Corner Radius R5 – R10 mm Reduces stress concentration and prevents cracking.
​Structural Design​ Mold Body Material Gray Cast Iron (HT200), Ductile Iron (QT450-10), Cast Steel (ZG230-450) ​Gray Iron​ is standard. ​Ductile Iron/Cast Steel​ offer superior longevity and toughness.
Wall Thickness 15 – 25 mm Balances structural strength, heat management, and material cost.
Cooling Fins Present on the bottom side Essential for rapid heat dissipation. Height, thickness, and number are optimized for cooling efficiency.
Lifting Lugs / Eyes Integrated at both ends For safe handling, lifting, and installation onto the casting chain.
​Gating System (Multi-Cavity)​​ Pouring Basin Centralized or end-positioned The main entry point for molten aluminum.
Main Runner Designed for minimal turbulence Channels molten metal from the basin to individual cavities.
Ingates Controlled cross-section Connects the runner to the mold cavity. Design ensures smooth filling.
​Performance & Quality​ Expected Service Life Gray Iron: 8,000 – 15,000 casts Highly dependent on material, operating temperatures, and maintenance.
Ductile Iron/Cast Steel: 20,000 – 40,000+ casts
Surface Finish Machined/Smoothed interior surfaces Minimizes ingot sticking and ensures a smooth ingot surface finish.
Surface Treatment Optional: Aluminizing, Anti-stick Coating Significantly enhances release performance and extends mold life.
​Operational Parameters​ Pre-heating Temperature 150 – 200 °C ​Mandatory​ before casting to prevent thermal shock and improve metal flow.
Mold Release Agent Graphite-based or water-based Must be sprayed evenly to facilitate demolding and protect the mold surface.
Primary Cooling Method Forced Air Cooling (on fins) Most standard and controlled method. Water misting is also an option.

Notes:​​

  1. ​Customization:​​ All parameters can be customized according to your specific casting machine, production line layout, and ingot specification requirements.
  2. ​Compatibility:​​ Please provide your machine model and desired ingot weight for precise dimensional engineering.
  3. ​Quality Assurance:​​ Our molds are manufactured to international standards, ensuring dimensional accuracy, durability, and high production efficiency.

We are ready to provide a detailed quotation based on your specific parameter needs. Please feel free to contact us for further discussion.

Other Ingot Mold Models

     Alloy_Particle_Mold_Front_Photo